We decided to make an extension to Joeys Handbrake cover, One that covers the front of the handbrake mechanism. This is the ally section that he bent to slot into his original cover. He rivitted a plate on either side so that it would remain flush when screwed together
We bent some draft excluder and fitted it like so, The excluder will have small screws to hold it in position! In fact we ended up using the very same little screws that we did not use to hold the windscreen in place!
Here it is all covered in carpet with the blue trim on the front edges. We need to paint the brush frame Black so they don't stand out.
And now Jump forward a bit and here it is with the Seats and tunnel top finally fitted. We are very happy with the result.
